Gateway DVD Player - Manual (Page 41)

35 www.gateway.com
Defining the speaker set
Use this setting to identify the type of speakers in your audio setup.
To define your speaker setup:
1
On the player’s remote control, press STOP , then press SETUP . The Welcome to Setup
screen opens.
2
Use your remote control’s arrow buttons to highlight Analog , then press ENTER . The
Analog audio setup menu opens.
3
Highlight Speaker Set , then press ENTER . The active speakers are listed.
4
Highlight each of the following speakers, then press the buttons to turn them
on or off:
■ Subwoofer
Turns subwoofer output on or off.
■ Surround
Turns left/right surround speaker output on or off.
■ Center
Turns center speaker output on or off.
5
Highlight Ctr Spkr Size , then press the buttons to select Large or Small to indicate
the relative size of the center speaker.
6
Highlight OK , then press ENTER .