GarrettCom MNS-6K 4.1.4 - Manual (Page 239)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
238
List of commands in this chapter
Syntax
show gvrp - shows whether GVRP is disabled, along with the current settings for the maximum
number of VLANs and the current Primary VLAN
Syntax
gvrp <enable|disable> - enable or disable GVRP
Syntax
show-vlan – list all the VLANs (including dynamic VLANs) on the switch
Syntax set-ports port=<port|list|range> state=<learn|block|disable> - set the state of the port
to learn, block or disable for GVRP. Note the default state is disable
Syntax static vlan=<VID> - convert a dynamic VLAN to a static VLAN
Syntax set-forbid vlan=<tag vlanid> forbid=<port-number|list|range> - sets the forbid GVRP
capability on the ports specified
Syntax show-forbid – display the ports with GVRP forbid capabilities