GarrettCom MNS-6K 4.1.4 - Manual (Page 322)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Command Description
snmp enter the SNMP Configuration mode
snmpv3 enter the SNMP V3 configuration mode – note
enable SNMP V3 by using the
“set snmp”
command which follows
sntp [enable|disable] enable or disable the SNTP services
sntpserver enter the SNTP Server configuration mode
sntpsrv <start|stop> Start or stop the SNTP Services
ssh <enable|disable|keygen> enable or disable the server. Also can be used for
generating the key
ssh port=<port|default> select a different port number for SSH
communication
s-ring <enable/disable> enable or disable S-ring capabilities
s-ring add port=<port1,port2> define ports which make up the s-ring ports.
Note as discussed earlier, you can create multiple
s-rings on a switch
s-ring del port=<port1,port2> remove the switch from S-ring topology by
eliminating the end ports on the switch
s-ring learn start the learning process to discover the ring and
the ports which make up the s-ring
321