GarrettCom MNS-6K 4.1.4 - Manual (Page 265)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Magnum6K25(smtp)##
add id=2 [email protected] traps=S events=CF
ip=192.168.10.13
Recipient successfully added
Magnum6K25(smtp)##
show smtp recipients
ID
E-mail Address SMTP Server Port Traps Events
===========================================================
1
rk@gci,[email protected] 67.109.247.195 25 All All
2 [email protected] 192.168.10.13 25 S CF
3 -- -- -- -- --
4 -- -- -- -- --
5 -- -- -- -- --
Magnum6K25(smtp)##
sendmail server=10.21.1.2 [email protected]
[email protected] subject=test body=hello
Magnum6K25(smtp)##
smtp enable
SMTP Alert is enabled.
Magnum6K25(smtp)##
sendmail server=10.21.1.2 [email protected]
[email protected] subject=test body=hello
Magnum6K25(smtp)##
show smtp config
SMTP Global Configuration
========================================
Status
: Enabled
SMTP Server IP : 67.109.247.195
SMTP Server Port : 25
Retry Count : 3
Magnum6K25(smtp)##
smtp disable
SMTP Alert is disabled.
Magnum6K25(smtp)##
show smtp config
SMTP Global Configuration
========================================
Status
: Disabled
SMTP Server IP : 67.109.247.195
SMTP Server Port : 25
Retry Count : 3
Magnum6K25(smtp)##
exit
A test email is sent to Jack to test email connectivity.
This email will not work as SMTP was disabled.
The sendmail command after SMTP is enabled will
work.
Jsmith will receive Critical and Fatal SNMP traps on a
different SMTP server than the other users. You may
want to do that if you expect a higher traffic load and
don’t want to throttle a SMTP server
264