GarrettCom MNS-6K 4.1.4 - Manual (Page 314)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Command Description
set stp type=<stp|rstp> Set the switch to support RSTP or change it
back to STP. Need to save and reboot the switch
after this command
set time hour=<0-23> min=<0-59>
sec=<0-59> sets the time
set timeformat format=<12|24> set the display time in the 12/24 hour mode
set timezone GMT=[+ or -] hour=<0-
14> min=<0-59> sets the timezone
set vlan type=<tag|none> defines the VLAN type
set-forbid vlan=<tag vlanid>
forbid=<port-number|list|range> sets the forbid GVRP capability on the ports
specified
set-leave <enable|disable> enables or disables the switch to immediately
process a host sending a leave message rather that
wait for the timer to expire
setport monitor=<monitor port number>
sniffer=<sniffer port number> set port mirror settings
set-port port=< port|list|range>
mode=<auto|forward|block> set the port characteristics for IGMP. Block
drops the unregistered multicasts. Forward
forwards unregistered multicasts
set-port port=<number|list|range>
default id=<number> sets the default VLAN id. For Magnum 6K
family of switches, the default VLAN id is 1,
unless changed using this command
set-port port=<number|list|range>
filter status=<enable|disable> enables or disables the VLAN filtering function.
set-port port=<number|list|range> join
id=<number> adds the specified port(s) to the specified VLAN
id
set-port port=<number|list|range>
leave id=<number> releases a specific port from a VLAN
set-port port=<number|list|range>
tagging id=<number> status=<tagged|
untagged> defines whether the outgoing packets from a port
will be tagged or untagged.
313