GarrettCom MNS-6K 4.1.4 - Manual (Page 282)

APPENDIX 1
APPENDIX 1 - Command listing by
Chapter
A rich environment – this Appendix provides a reference to the commands by chapter
Chapter 2 – Getting Started
Syntax ipconfig [ip=<ip-address>] [mask=<subnet-mask>] [dgw=<gateway>] – to set IP
address on the switch
Syntax save – save changes made to the configuration
Syntax reboot – restart the switch – same effect as physically turning off the power
Syntax show setup – show setup parameters
Syntax show config – show setup parameters configured
Syntax enable <user-name> - changing the privilege level
Syntax add user=<name> level=<number> - adding a user
Syntax delete user=<name> - deleting a user
Syntax passwd user=<name> - changing a password for a user
Syntax chlevel user=<name> level=<number> - changing the user privilege level
Syntax useraccess user=<name> service=<telnet|web> <enable|disable> - defines the
services available to the user to access the device for modifying the configuration
Syntax useraccess user=<name> group=<list> type=<read|write> <enable|disable> - set
read or write access for the command group
281