List of commands in this chapter, Igure, Setting up dhcp server on mns-6k-secure – GarrettCom MNS-6K 4.1.4 User Manual

Page 84

Advertising
background image

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E

83

Gateway : 192.168.10.1
Lease time : 8 Hours
Magnum6K25(dhcpserver)##

dhcpsrv stop


The Server takes few seconds to Stop.................................
Magnum6K25(dhcpserver)##

exit


Magnum6K25#

F

IGURE

51

Setting up DHCP Server on MNS-6K-SECURE

List of commands in this chapter

Syntax - dhcpsrv <start|stop> - start or stop the DHCP server. By default, the server is off

Syntax - config startip=<start ip> endip=<endip> mask=<mask> [dns=<dns1,

dns2,..dns10>] [gateway=<gateway>] [leasetime=<lease time(1..10 hours)>]
configure the DHCP lease request parameters such as starting IP address, ending IP address, DNS server
parameters, default gateway IP address and lease time


Syntaxaddlease ip=<ip> mac=<mac> [leasetime=<lease time (1..10)>] – add a specific host

with a specific IP address


Syntax - reserve-ip ip=<ip> [mac=<mac>] - reserve a specific IP address for a device

Syntax - clear-reserveip ip=<ip> - clear the reverse IP assigned

Syntax - show dhcpsrv <config|status|leases> - display the DHCP server configuration, leases as well
as status

Advertising
This manual is related to the following products: