GE GEFanuc Automation Programmable Control Products TCP/IP Ethernet Communications for the Series 90t-70 PLC GFK-1004B - Manual (Page 33)

2
2-12 TCP/IP Ethernet Communications User’s Manual – January 1996 GFK-1004B
To configure the Ethernet Interface:
Go to the I/O Configuration rack screen in the Logicmaster 90-70 Configuration Package,
and follow the steps listed in the appropriate section below: PLC Systems with CPU
Firmware Version 5.03 or later, or PLC Systems with CPU Firmware Version prior to 5.03.
PLC Systems with CPU Firmware Version 5.03 or Later
1. Move the cursor to the desired rack and slot location. The slot may be either
unconfigured or previously configured.
2. Press the Communications softkey, i.e., Comm ( F6 ) . Your screen display will change
to the one shown on the following page.