GE GEFanuc Automation Programmable Control Products TCP/IP Ethernet Communications for the Series 90t-70 PLC GFK-1004B - Manual (Page 85)

3
3-33 GFK-1004B Chapter 3 The GEnet System Manager–Station Configuration
Section 5: Using the GSM Support Functions
This section describes the GSM support functions. The GSM Menu topics discussed in
this section are:
H List All Stations
H List all Configured Applications
H Setup GSM
H Exit to DOS
List All Stations Screen
The List All Stations screen displays a list of all of stations that are configured in the
GSM directory on the hard disk. A typical List All Stations screen is shown below.
Figure 3-12. List All Stations Screen
This screen displays the following information about each station:
H Station Name
H Station Type
H Load Type
H Station MAC Address
H Comments
Use the Up Arrow, Down Arrow, PgUp, PgDn, Home, and End keys to examine the list
of configured stations. The details about a specific station can be examined by pressing
the Alt-V key. When you press the Alt-V key, you are prompted for the name of the sta-
tion to examine. If you enter a blank field, the top item in the menu is examined.