Genicom EasyCoder 3400e - Manual (Page 82)

Appendix A— Specifications
C d 39
Helvetica CondensedHelvetica
70 EasyCoder 3400e Bar Code Label Printer User’s Manual
Printhead
200 dpi
Printed dot size 0.127 mm (0.00492 inch square)
Width 104 mm (4.1 inches square)
Resolution 8 dots per mm (203 dots per inch)
Number of elements 832 per printhead
“X” dimensions 10 mil to 50 mil (0.25 mm to 1.27 mm);
5 mil (0.13 mm) in drag mode only (specified media only)
400 dpi
Printed dot size 0.065 mm (0.0025 in square)
Width 112 mm maximum (4.4 in)
Resolution 16 dots per mm (406 dots per inch)
Number of elements 1,792 per printhead
“X” dimensions 5 mil to 50 mil (0.127 mm to 1.27 mm);
2.5 mil (0.06 mm) in drag mode only (specified media only)
Printing Method
The 3400e printer is capable of direct thermal (DT) printing or thermal
transfer (TTR) printing using thermal transfer ribbon.
Printing Speed
Maximum 152.4 mm (8 inches) per second
Minimum 50.8 mm (2 inches) per second
You can change the print speed in 1 ips increments only: 2, 3, 4, 5, 6, 7, or
8.
Ribbon
Roll 152 m (6,000 linear in)
Widths 51 mm (2.0 in)
76 mm (3.0 in)
104 mm (4.1 in)
Diameter 57 mm (2.25 in maximum)
Self-Strip (optional)
Self-strip printing is an option that you order with your printer. The self-
strip rewinder hub can take up the backing of an entire 15,240-centimeter
(6,000-inch) roll of media.
Peel Release 10-50 grams