Muratec MFX-1500 - Manual (Page 106)

Beyond the basics
2.58
10. Press ENTER . The fax machine now gives you one last chance to change your
mind about the erasure.
03:Erase F-Code Doc.
Check Program/Enter
Important: To quit without erasing this or any other document, press
PROGRAM or STOP . The machine will return to standby mode.
11. Press ENTER . The fax machine will erase the desired document, then return to
standby mode.
Using a security box
If using an F-Code box as a security box, you cannot store documents in it by
scanning; it is for receiving only.
Printing a document
When your machine receives a document via ITU - T sub-addressing from another fax
machine, your machine will print a message alerting the person for whom the
document is intended. Then the person has a certain number of days (see page 2.54)
in which to print out the message before your machine erases it.
Note: For this operation to work, two things must be true:
•
You must know the security box’s number.
•
You must know the four-digit passcode for the security box.
To print a received message from a security box:
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY / FAX to change to Fax mode.
2. Press PROGRAM , P , 4. The display shows:
P4 Print F-Code Doc.
Program/Enter
3. Press ENTER .
Select F-Code Box
01:Murata Machinery
If this box holds the document you want to print, skip to step 5.
Otherwise, proceed to step 4.
4. Use the numeric keypad to enter the two-digit number (01–50) of the security
box currently “holding” the document you wish to print. We’ve entered 03.
Select F-Code Box
03:Muratec UK
5. Press ENTER . The display will show:
03:Print F-Code Doc.
F-Code Passcode:****
Note: If the security box is holding no documents at this time, the machine
will display this briefly before returning to step 4:
Select F-Code Doc.
No Document Stored
In step 4, be sure to select a security box that is holding at least one
document.