Muratec MFX-1500 - Manual (Page 82)

Beyond the basics
2.34
Audible alarm
Whenever your fax machine receives a document from another fax machine, your
machine will sound the alarm tone alerting the person for whom the document is
intended.
Important: The alarm tone is sounding until either the person presses STOP or
another document is received.
Note: Your machine does not sound the alarm during.
•
Polling
• Call request
•
Security reception
•
Turing off this feature
To toggle this audible alarm feature on or off:
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY / FAX to change to Fax mode.
2. Press PROGRAM , J , 1, 9, ENTER .
Audible Alarm: Off
Program/Enter
If you see the setting you wish, skip to step 4.
Otherwise, proceed to step 3.
3. To change the setting, press PROGRAM once or twice until your desired choice
appears. Here, we’ve chosen “On”.
Audible Alarm: On
Program/Enter
4. Press ENTER to save the setting.
Using alternative telephone network service
providers
Your fax machine is fitted with a Blue key on the control panel to allow easy access to
other telephone networks such as Cable & Wireless (Mercury).
The following information describes how to program the Blue key for the Cable &
Wireless telephone network (Mercury). For other networks you will have to program
the appropriate access number in place of the 132 (Mercury residential service).
For Cable & Wireless (Mercury) proceed as follows:
Mercury access via 131 PIN code (Mercury PIN code service)
For PIN code Mercury access, please program your fax as follows:
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY / FAX to change to Fax mode.
2. Press PROGRAM , J , 2, 0, ENTER .
Dial Prefix No 03
_
The number you see in the right of the display tells you how many characters
you have entered into the Mercury number before.
3. Enter the Mercury access number 1, 3, 1 on the numeric keypad.
Dial Prefix No 03
131_
4. Press Blue key on the control panel to enter a “ M ” in the display. This
instructs your fax machine to wait for a Mercury dial tone before dialling the
PIN number.
Dial Prefix No 03
131M_
5. Now enter both parts of your PIN number (10 digits).
Dial Prefix No 03
131M1234567890_
Note: If you wish to erase your PIN number, press CANCEL to delete all
programmed numbers before proceeding to step 6.
6. Press ENTER to save the number and continue.