Muratec MFX-1500 - Manual (Page 108)

Beyond the basics
2.60
12. What you do now depends upon when you wish the transmission to begin.
•
To have it begin now, skip to step 15.
• To delay it, proceed to step 13.
13. Press COMMUNICATION OPTIONS , ENTER .
The display will show:
Delayed
Enter Time: 15/17:05
14. Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER .
Note: If you make a mistake or you want to change just one character in the
number, press
to move the cursor leftward, or to move it
rightward, to that character. Then re-enter until the number is just as
you want it.
15. Press START .
If, in step 12, you chose an immediate transmission, your fax machine will begin
dialling. If you chose a delayed command, the machine will display “Reserved” on
the top line of the display, indicating that the machine has stored the command in
memory and will perform it later.
F-Code database polling
1. Press COPY / FAX to change to Fax mode, if necessary.
2. Press COMMUNICATION OPTIONS eight times.
8.F-Code Polling
Comm.Option/Enter
3. Press ENTER .
Enter Sub-Address
_
4. Use the numeric keypad to enter the appropriate sub-address number. In this
example, we’ve entered 123456.
Enter Sub-Address
123456_
5. Press ENTER . The display will show:
Enter Password
_
6. Use the numeric keypad to enter the appropriate password number. In this
example, we’ve entered 654321.
Enter password
654321_
Note: If you know that this sub-address does not have a password, skip to
step 8.
7. Press ENTER . The display will show:
Enter Fax Number
_
8. Enter the fax number either by pressing a one-touch key, entering a speed-dial
number or dialling from the numeric keypad. Do not press
START .
9. What you do now depends upon when you wish the transmission to begin.
•
To have it begin now, skip to step 12.
•
To delay it, proceed to step 10.
10. Press COMMUNICATION OPTIONS , ENTER .
The display will show:
Delayed
Enter Time: 15/17:05
11. Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER .
Note: If you make a mistake or want to change just one character in the
number, press
to move the cursor leftward, or to move it
rightward, to that character. Then re-enter until the number is just as
you want it.
12. Press START .
If, in step 9, you chose an immediate transmission, your fax machine will begin
dialling. If you chose a delayed command, the machine will display “Reserved” on
the top line of the display, indicating that the machine has stored the command in
memory and will perform it later.