Muratec MFX-1500 - Manual (Page 23)

Getting started
1.14
Setting for paper size
Your fax comes set for A4-sized paper. To set it to use another-sized paper:
1. Unlock the pin from the upper set of holes by
reaching inside of the paper cassette and
pressing the nib, as shown.
2. Remove the pin.
3. Insert the pin into the correct set of holes.
Spare pin
Important: If you try to use the different-sized paper which you set in this
step, your fax will sound its alarm and display the following
message when you try to print.
Check Rx Paper Size
Open&Close Top Cover
Note: Be sure to attach the paper size sticker to the outside of the cassette to
remind you which paper size it contains.
4. If you will be setting B4- or B5R-sized paper in the cassette:
Remove the both side spacer and adjust the side paper guides --- by sliding
either of them to the left or right --- to fit the paper you’ll be setting.
Note: Insert the removed spacer into the place of cassette as shown. Keep
them, you’ll need them when you change the paper size to the A4- or
A5 size.
5. If you will be setting A4- or A5R-sized paper in the cassette:
Adjust the side paper guides --- by sliding either of them to the left or right --- to
fit the paper you’ll be setting, and then set the spacer as shown.