Muratec DIGITAL LASER F-114 - Manual (Page 118)

Service Manual
Adjustment and Troubleshooting
4-58
3) JAM 1
Description: 1. Paper is jammed in front of or inside the fuser.
2. Paper is stuck in the exit roller and in the fuser just after passing through the Actuator-Feed.
1. If the recording paper is jammed in
front of or inside the fuser.
2. If the recording paper is
stuck in the discharge roller and the
fuser just after passing through the
Actuator-Feed, Feed Actuator
may be defective.
Replace the SMPS or Exit-Sensor.
1. Replace the Main PBA.
2. Reassemble the Actuator-Feed
and Spring-Actuator if the
movement is bad.
PTL
PIC
K /R
PR
CR
DR
SR
TR FR
Empty Sensor
OPC
L S U
Fuser Toner Cartridge
EXIT Sensor
Feed Sensor
MP Sensor