Muratec DIGITAL LASER F-114 - Manual (Page 39)

Service Manual
Disassembly and Reassembly
3-3
3.4 Side Cover L
1. Before you remove the Side Cover L, you should
remove:
- Remove handset and cradle.
2. Release the latches from Frame Ass,y in the direction
of the arrow, as shown below. Take care to disconnect
speaker harness.
3. If necessary, remove the two screws securing the
Speaker and remove it.
Speaker
Bracket
Side Cover L
3.5 Side Cover R
1. Before you remove the Side Cover R, you should
remove:
- Rear Cover (see section 3.3)
2. Release the latches from Frame Ass'y in the direction
of the arrow, as shown below.
Side Cover R