Muratec DIGITAL LASER F-114 - Manual (Page 32)

Service Manual
Product spec and feature
2-20
2.2.5.2 SMPS (Switching Mode Power Supply)
ItThis is the power source for the whole system. It is an independent module so that it is possible to use it for
common use. It is mounted at the bottom of the set.
It consists of the SMPS section, which supplies the DC power to drive the system, and the AC heater control
part, which supplies the power to the fuser. The SMPS has four output channels ((+5V, -5V, +12V, +12Vand
+24Vs).
There are three kinds of power, 120V exclusive (America), 220V exclusive (Europe), and 220V for China
(nations with unstable power supply).
1) AC Input
- Inputting rated voltage : AC 220V ~ 240V AC 100~127V
- Inputting voltage fluctuating range : AC 198V ~ 264V AC 90V ~ 135V
- Rated frequency : 50/60 Hz
- Frequency fluctuating range : 47 ~ 63 Hz
- Inputting Current : Under 4.0Arms/2.0Arms
2) Rated Power Output
3) Consumption Power
4) Length of Power Cord : 1830 ± 50mm
5) Power Switch : Fitted
NO Item CH1 CH2 CH3 CH4
1 Channel name +5V -5V +24.0V +24.0VS
2 CONNECTOR PIN CON 2 CON2 CON2 CON2
3.3V PIN: 3, 4 -5V PIN : 7 24V PIN: 11, 12 24V PIN: 13, 16
GND PIN: 5, 6 GND PIN: 8 GND : 9, 10 GND : 18
3 Rated outputting voltage +5V ± 5% -5V ± 5% +24V ± 10% +24V ± 10%
(4.75 ~ 5.25V) (-4.75~-5.25V) (21.6 ~ 26.4V) (21.6 ~ 26.4V)
4 Rated outputting current 1.5 A 0.5A 1.5 A 1.0 A
5 Ripple noise voltage 150mVp-p 150mVp-p 500mVp-p 500mVp-p
6 Maximum output 7.5W 0.6W 36.0W 24.0W
NO Item CH1 CH2 CH3 CH4 System
(+5V) (+12V) (+24V) (+24VS)
1 Stand-By 1.0 A 0.05A 1.0 A 0.5 A AVG : 60 Wh : 220V
AVG : 75 Wh : 110V
2 Operating 1.5 A 0.5A 1.5 A 1.0 A AVG : 320 Wh
3 Sleep-Mode 0.3A 0.0A 0.0A 0.06A AVG : 15 Wh