Muratec DIGITAL LASER F-114 User Manual
Page 84
Service Manual
Alignment & Troubleshooting
4-24
NO. Not Assigned
Meaning:
The speed dial location you tried to use has no number assigned to it.
Solution:
Dial the number manually with the keypad, or assign the number.
[No Paper]Add Paper
Meaning:
The paper cassette is empty. The printer system stops.
Solution:
Load new paper in the paper tray.
Operation NotAssigned
Meaning:
You are doing in the Add/ Cancel operation, but there is no jobs waiting.
Solution:
Check the display to see if there is any scheduled job. The display should
indicate them in Standby mode, for example, Delay Fax.
[Paper Jam 0]Open/Close Door
Meaning:
Paper has jammed in paper feeding area. Paper is jammed in pick-up unit
Solution:
Press STOP and clear the jam.
[Paper Jam 1]Open/Close Door
Meaning:
Paper has jammed inside the unit. Paper has jammed in paper exit unit.
Solution:
Clear the jam.
[Paper Jam 2]Check Inside
Meaning:
Paper has jammed inside the unit. Paper has jammed in fuser area.
Solution:
Clear the jam.
Power Failure
Meaning:
Power has turned off then on and the machine’s memory has not been saved.
Solution:
You need to start again the job which you were trying to do before the power failure.
Retry Redial?
Meaning:
The machine is waiting for the programmed interval to automatically redial.
Solution:
You can press START to immediately redial, or STOP to cancel the redial operation.
[Stop Pressed]
Meaning:
The Stop/Clear button is pressed during a copy or fax operation.
Solution:
Try again.
[Toner Empty]
Meaning:
The toner cartridge has run out. The machine stops printing.
Solution:
Replace with a new toner cartridge.
[Toner Low]
Meaning:
The toner cartridge is almost empty.
Solution:
Take out the toner cartridge and gently shake it. By doing this, you can temporarily
reestablish printing operations."