Muratec DIGITAL LASER F-114 - Manual (Page 122)

Service Manual
Adjustment and Troubleshooting
4-62
7) Paper rolled on the OPC Drum
Description: Paper is rolled up in the OPC.
1. Paper is too thin.
Use paper that conforms to the printer
specification.
2. The face of paper is curled.
Ensure paper is stored properly to prevent
curl.
Note. To remove paper rolled in the OPC.
• Remove the toner cartridge from the set,
taking care not to touch the green surface.
Use the gearwheel at the side to rotate
the OPC drum and pull the paper from
the cassette.
• Clean fingerprints on the OPC gently
with soft tissue, taking care not to
scratch the surface.