Muratec DIGITAL LASER F-114 - Manual (Page 121)

Adjustment and Troubleshooting
Service Manual
4-61
6) Paper rolled in the fuser
Description: Paper rolled around fuser rollers or ‘Concertina’ jam
1. Contamination of the
pressure roller or heat roller.
After disassembling the fuser,
clean contamination from between
the heat roller and the thermistor
and also clean contamination from
the pressure roller. Clean the
surface of the rollers with IPA or
water.
2. Damaged or deformed
ribs, claws or springs.
Check for damage or deformation
of the print claws and the holder
plate claws, and repair or replace
as appropriate.