Muratec DIGITAL LASER F-114 - Manual (Page 96)

Service Manual
Adjustment and Troubleshooting
4-36
11) Ghost (3)
Description: Ghost occurs at 66.3 or 75.5 mm intervals.
1. Fuser contamination.
Disassemble the fuser and remove
any contamination on the rollers.
Clean any contamination from
between the Thermistor and the
Heat roller. (Caution: Take care not
to deform the rollers.)
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
66.3 or 75.5 mm