Muratec DIGITAL LASER F-114 - Manual (Page 46)

Service Manual
Disassembly and Reassembly
3-10
1. Before you remove the Scan Motor Ass'y, you should
remove:
- Rear Cover (see section 3.3)
- Side Cover L (see section 3.4)
- Side Cover R (see section 3.5)
- OPE Unit (see section 3.6)
- Front Cover (see section 3.10)
- Scan Ass'y (see section 3.11)
2. Open the OPE Unit.
3. Remove the three silver screws securing the Scan
Motor Ass'y and remove it.
4. If necessary, remove the one screw securing the Scan
Motor and release the latches from Motor Bracket in
the direction of the arrow, as shown below.
3.12 Scan Motor Ass'y
Scan Motor Ass'y
Scan Motor
1
2