Mercedes-Benz CS1000 - Manual (Page 10)

Mercedes Benz Code Scanner CS1000 OB15-11
10
Connection Table
Test Lead of Cable Connection source
Red Power -To power supply socket or vehicle battery
Black Ground - To socket 1
Yellow To diagnostic test socket
Power supply (B+) socket on the vehicle Diagnostic Connectors
8-pole connector Use with the battery extension cable to the vehicle battery
16-pole connector Socket 16 (circuit 15 - ignition ON)*
Not present in some models. Use battery +.
38-pole connector Socket 3 (circuit 30 - Battery+)
*Must be performed with the ignition ON to power up the scanner.
Ground (-) socket on the vehicle Diagnostic Connectors
8-pole connector socket 1
16-pole connector socket 1
38-pole connector socket 1
Connector Layout of Vehicle Diagnostic Connector
8-pole Diagnostic Connector
Models 201, 124, 126
1 Ground
2 Not used
3 CIS-E Continuous fuel injection system (CFI)
4 ELR
EDS Diesel injection system - Electronic idle speed control system
Electronic diesel system
5 ASD
4MATIC Automatic locking differential
Automatic-engaged four wheel drive (124 only)
6 SRS Supplemental Restraint System
7 A/C Air Conditioning
8 Not used