Mercedes-Benz CS1000 - Manual (Page 9)

Mercedes Benz Code Scanner CS1000 OB15-11
9
SECTION
1
Using the
CS1000
C
ode
S
canner
Diagnostic Cable
General Usage Notes


The OB15 Code Scanner can display available fault codes from Mercedes Benz vehicles
fitted with 8-pole, 16-pole and 38-pole Diagnostic Connectors. The Red wire from the
scanner is for powering up the unit and is taken either from the power source socket on the
Diagnostic Connector, if available, or from the vehicle battery, using the extension cable
supplied. The Black earth wire from the scanner is grounded to the earth socket on the
Diagnostic Connector. The Yellow wire from the scanner is used to read the codes from the
Diagnostic Connector.


The P/N 15-C2 diagnostic cable must be used with the P/N 15-C2-1 diagnostic cable for the
38-pole vehicle diagnostic connector.