Mercedes-Benz CS1000 - Manual (Page 46)

1
ANALOG CODES
CS1000 Code Scanner OB15-11
DTC Readout Possible Cause of Failure
46
17 Crankshaft position sensor faulty
18 Magnets for crankshaft position sensor not recognized
19 Ground, Coding from Left EZL/AKR Ignition Control Module Not Present
20 Ignition control module DTC memory faulty
21 Load sensor in control module faulty. (recognized with engine running)
22 Not used
23 Not used
24 Not used
25 Not used
26 Ignition control module data exchange fault
27 Control module data exchange fault
28 Electronic accelerator control module/idle speed control data exchange fault