Maytag MDE9651 - Manual (Page 22)

22
13. Secure the hinge attachment using the
screws in the sequence shown in the pic-
ture.
14. Replace the screw unfastened in
point 11.
15. Replace the lower front plate.
9. Insert the cover washer in place of the
door magnet.
10. Insert the screws so that the door mag-
net and cover washer are held in place.
11. Remove the screw indicated. If using a
condenser dryer, you must also open the
condenser panel.
12. Then fit the door securely on the right
side of the machine.
1
2
2
1
2
2
1
3
2