Table 13-8. ip routing table oids, Ip r – Mocomtech CIM-550 User Manual

Page 245

Advertising
background image

CiM-550 IP Enabled Satellite Modem

Rev. 2

SNMP interface

CD/CIM550.IOM

219

13.2.2.6 T

HE

IP R

OUTING

T

ABLE

The IP routing table contains an entry for each route presently known to the cim550.

Table 13-8. IP Routing Table OIDs

OID Description

ipRouteDest

Destination IP address of this route. An entry with a value of
0.0.0.0 is considered a default route.

ipRouteIfIndex

Index value (ifIndex) which uniquely identifies the local interface
through which the next hop of this route should be reached.

ipRouteMetric1

Primary routing metric for this route. User defined routes have a
value of 1. All others “automatically” defined routes have a value
of zero.

ipRouteMetric2

Not used and its value is -1.

ipRouteMetric3

Not used and its value is -1.

ipRouteMetric4

Not used and its value is -1.

ipRouteNextHop

IP address of the next hop of this route.

ipRouteType

Type of route. A value of direct(3) is used when the destination is
connected to the local network. A value of indirect(4) is used when
the destination is reached by routing to a non-local network.

ipRouteProto

Routing mechanism via which this route was learned. A value of
local(2) means the route was entered manually. A value of
netmgmt(3) means the route was set via a network management
protocol. A value of icmp(4) means the route was obtained via
ICMP. A value of other(1) is used for all other cases.

ipRouteAge

Number of seconds since this route was last updated.

ipRouteMask

Indicates the mask to be logical-ANDed with the destination
address before being compared to the value in the ipRouteDest
field. If the value of the ipRouteDest is 0.0.0.0 (a default route),
then the mask value is also 0.0.0.0.

ipRouteMetric5

Not used and its value is -1.

ipRouteInfo

Not used and is set to the null-OID.

Advertising