Mocomtech CIM-550 - Manual (Page 268)

CiM-550 IP Enabled Satellite Modem Rev. 2
SNMP interface CD/CIM550.IOM
242
13.4.2.5 R EDUNDANCY G ROUP
Table 13-31. Redundancy OIDs
OID Description
cimCurrentRedundantState Displays if the modem is Online and Offline.
The Online modem is the one that will
process traffic. The Offline modem monitors
the health of the online unit and will take
over if it detects a failure.
cimLocalUnitManagementIpAddress IP Address for the Ethernet Interface for the
Local Unit.
cimRedundantUnitManagementIpAddress IP Address for the Ethernet Interface of the
Remote Unit.
cimRedundantTrafficIpAddress Traffic IP address will always be active on
the Online Modem. When a fault occurs the
traffic IP address will float between the two
redundant modems.
cimRedundantTrafficSubnetMaskLen This is the length of the traffic IP address
and can float between the two redundant
modems depending on if a failure occurs.
cimForceUnitOffline Forces a redundant switchover so that if the
modem is online it will transition to offline
and stop processing traffic. If the modem is
already offline, then this command will be
ignored.
13.4.2.6 O
PERATION AND
M
AINTENANCE
G
ROUP
Table 13-32. Operation and Maintenance Subgoup OIDs
OID Description
cimAppVersion Displays the CiM Software’s name, version, and date.
cimSaveConfiguration Allows a user to save the current configuration of the CiM-
550 to permanent storage.
cimReset Allows a user to reboot the modem. It has the same logical
effect of power-cycling the unit.