14 cim ip module checkout and fault isolation, Introduction, Cim ip modulecheckout – Mocomtech CIM-550 User Manual
Page 445: 1 introduction, 2 cim ip modulecheckout, M ip m, Ntroduction, Odule, Heckout
419
Chapter 14.
CiM IP Module Checkout and
Fault Isolation
14.1 I
NTRODUCTION
CAUTION
This equipment contains parts and assemblies sensitive to damage by
ESD. Use ESD precautionary procedures when touching, removing,
or inserting PCBs.
This Chapter is for testing and troublshooting CiM IP module and assumes that the base
satellite modem is correctly configured and functioning properly.
14.2 C
I
M IP M
ODULE
C
HECKOUT
The steps in this guide will lead to following configuration:
IP Address:
Mask:
GW:
172.16.10.100
255.255.255.0
172.16.10.10
PC 1
Satellite IP Modem (CiM 1)
Ethernet Interface (fei0)
IP Address:
Mask:
172.16.10.10
255.255.255.0
HDLC Interfacce (hdl1)
IP Address:
Mask:
10.1.1.1
255.255.255.0
10/100 BaseT
Etherneet Hub
RF or IF
IP Address:
Mask:
GW:
172.17.10.100
255.255.255.0
172.17.10.10
PC 2
Satellite IP Modem (CiM 2)
10/100 BaseT
Etherneet Hub
Ethernet Interface (fei0)
IP Address:
Mask:
172.17.10.10
255.255.255.0
HDLC Interfacce (hdl1)
IP Address:
Mask:
10.1.1.2
255.255.255.0
Figure14-1. Typical Point-to-Point System Configuration