Pinouts of front panel connectors, Ethernet jacks – Matrox Electronic Systems 4SIGHT-M User Manual
Page 115
Pinouts of front panel connectors 115
Pinouts of front panel connectors
The front panel has the following connectors:
• Two Ethernet jacks, one 10/100BaseT standard Ethernet jack and one Gigabit
Ethernet jack.
• Four USB connectors.
• One analog VGA connector.
• A DVI-compliant digital VGA connector ("DVI-I").
• An auxiliary I/O interface.
Ethernet jacks
The following describes both the 10/100 BaseT Ethernet jack and the Gigabit
Ethernet jack available on the Matrox 4Sight-M unit.
10/100 BaseT Ethernet
The 10/100 BaseT standard Ethernet jack is more specifically an 8-pin, RJ45 male
connector. The 10/100 BaseT Ethernet jack is the Ethernet jack on the left. Its
pinout is outlined in the following table.
Pin
Signal
I/O
Description
1
TD+
O
Transmit Data+ .
2
TD-
O
Transmit Data- .
3
RD+
I
Receive Data+ .
4-5
NC
-
Not connected.
6
RD-
I
Receive Data- .
7-8
NC
-
Not connected.
1
8
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30