Matrox Electronic Systems 4SIGHT-M - Manual (Page 118)

118 Appendix B: Technical reference
DVI-compliant digital VGA connector ("DVI-I")
The DVI-compliant digital VGA connector ("DVI-I") is more specifically a
29-pin female connector. 24 pins are reserved for digital output and 5 pins are
reserved for analog output. The connector’s pinout is outlined in the following
table.
• Output voltage and maximum current: 5 V, 0.75 A.
• Auto-resettable fuse: Yes.
11 NC - Not connected.
12 SDA I/O DDC serial data line.
13 HSYNC O Horizontal synchronization.
14 VSYNC O Vertical synchronization.
15 SCL I/O DDC data clock line.
Pin Signal I/O Description
1 TX2- O Transmission Data Line 2- .
2 TX2+ O Transmission Data Line 2+ .
3 GND - Ground.
4-5 NC - Not connected.
6 SCLK I/O DDC data clock line.
7 SDATA I/O DDC serial data line.
8 VSYNC O Vertical synchronization.
9 TX1- O Transmission Data Line 1- .
10 TX1+ O Transmission Data Line 1+ .
11 GND - Ground.
High-resolution display configuration ("1")
Pin Signal I/O Description
1 8
9
17 24
C1
C2
C3
C4
C5
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30