Matrox Electronic Systems 4SIGHT-M - Manual (Page 125)

Pinouts of back panel connectors 125
Matrox Meteor-II
/Camera Link
13 VID1_IN3 I Video input 1 (Blue).
14 GND - Ground.
15 VID1_IN1 I Video input 1 (Red).
16 DC_OUT O +12 V power supply. The DC_OUT signal is
protected with a 0.75 A auto-resettable fuse.
17-18 GND - Ground.
19 CLK_IN I TTL clock input.
20 TRIG I TTL trigger input.
21-22 NC - Not connected.
23 EXP(2) O TTL exposure 2 output.
24 USER1_OUT O TTL user output.
25-31 GND - Ground.
32 VSYNC I/O TTL vertical synchronization.
33 CLK_OUT O TTL clock output.
34 OPTOTRIG- I Opto-isolated trigger negative input.
35 OPTOTRIG+ I Opto-isolated trigger positive input.
36-37 NC - Not connected.
38 EXP(1) O TTL exposure 1 output.
39 USER1_IN I TTL user input.
40 VID2_IN3 I Video input 2 (Blue).
41 VID2_IN2 I Video input 2 (Green).
42 GND - Ground.
43 SYNC_IN I Video input synchronization.
44 VID1_IN2 I Video input 1 (Green).
Matrox Meteor-II /Multi-Channel
Pin Signal I/O Description
Matrox Meteor-II /Camera Link
Pin Signal I/O Description
1 DC_OUT +12 V power supply. The DC_OUT signal is
protected with a 0.75 A auto-resettable fuse.
2 TTLTRIG I TTL trigger input.
3-5 GND Ground.
6-7 NC Not connected.
8 OPTOTRIG+ I Opto-isolated trigger positive input.
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30