Matrox Electronic Systems 4SIGHT-M - Manual (Page 24)

24 Chapter 2: Connecting peripherals to the unit
Overview
This chapter describes how to connect various devices to the Matrox 4Sight-M
unit.
Important In addition to connecting the devices, some devices must be configured to properly
interact with Matrox 4Sight-M. For information on the configuration procedure,
refer to your operating system-specific, Matrox 4Sight-M software manual.
The front and back panels of Matrox 4Sight-M provide connection to:
• A USB mouse, keyboard, and printer, as well as an additional USB or USB 2.0
device.
• One or two high-resolution monitors.
• An NTSC/PAL video display device, such as a TV monitor.
• A DVI display device (such as a digital flat panel screen).
Front panel Back panel
Serial
ports Ethernet jack (top)
and
USB 2.0
connectors (bottom)
analog VGA
connector (top)
and
DVI-compliant
digital VGA
connector (bottom)
Video input
connector
Audio input (top)
and output (bottom) Power
connector
Auxiliary I/O port
Gigabit Ethernet jack (top)
and
USB 2.0 connectors (bottom)
Power
button LEDs
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30