Matrox Electronic Systems 4SIGHT-M - Manual (Page 41)

Removing the Matrox 4Sight-M chassis 41
Removing the Matrox 4Sight-M chassis
To remove the Matrox 4Sight-M chassis:
Warning 1. Unplug the Matrox 4Sight-M power cord.
2. Remove the appropriate screws and nut on the Matrox 4Sight-M unit’s front panel.
3. With the Matrox 4Sight-M unit laid flat, face the back panel, place your hands
on top of the chassis and slowly slide the chassis so that the top and front panels
(which are attached) separate from the back and bottom panels (which are also
attached).
Front panel
remove this
screw
remove this
screw
remove these nuts
remove these nuts
Back panel
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30