Matrox Electronic Systems 4SIGHT-M - Manual (Page 123)

Pinouts of back panel connectors 123
Video input connector ("Video in")
There is one video input connector ("Video in") on the back panel. The video
input connector is a 44-pin, DB-HD female connectors. The pinouts are outlined
in the following tables. The pinout of the video input connector depends on
whether the Matrox 4Sight-M motherboard hosts a Matrox Meteor-II /Standard,
/Multi-Channel, or /Camera Link frame grabber.
Important Note the following about the power supply:
• The maximum current on a +12 V power supply is 0.75 A.
• Auto-resettable fuse: Yes.
Matrox Meteor-II
/Standard
Matrox Meteor-II /Standard
Pin Signal I/O Description
1 DC_OUT O +12 V power supply. The DC_OUT signal is
protected with a 0.75 A auto-resettable fuse.
2 VID_IN12 I Video input 12.
3-5 GND - Ground.
6-7 NC - Not connected.
8 USER2_OUT O User output.
9 USER2_IN I User input.
10 NC - Not connected.
11 VID_IN5 I Video input 5.
12 NC - Not connected.
13 VID_IN3 I Video input 3.
14 GND - Ground.
15 VID_IN1 I Video input 1.
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30