Matrox Electronic Systems 4SIGHT-M - Manual (Page 17)

Optional components 17
Memory
Computer memory is provided via a 184-pin DIMM slot, which supports
modules up to 1 Gbyte in size. A 1 Mbyte flash memory device stores the BIOS.
Optional components
You can purchase additional components for Matrox 4Sight-M, which if
purchased, will arrive pre-installed in the integrated unit. A description of each
device is outlined below.
Matrox frame grabbers
You can purchase a Matrox Meteor-II frame grabber for your unit.
Matrox Meteor-II
frame grabbers. The Matrox Meteor-II frame grabbers capture images and send data to the Host
along the PCI bus. They integrate 4 Mbytes of SGRAM to store the data until
the bus becomes available.
The Matrox Meteor-II frame grabbers are available in four versions in the
PC/104-Plus form factor:
• /Standard. This version captures composite (CVBS) and component (Y/C) video,
in NTSC or PAL format, with square-pixel resolutions.
• /Multi-Channel. This version captures component RGB video, with square-pixel
resolutions.
• /Digital. This version captures digital video with square-pixel resolutions from
digital cameras. Your unit will include a special back-plate that will accommodate
the two digital video inputs ("Digital Video in") connector of the Matrox
Meteor-II /Digital frame grabber.
• /Camera Link. This version captures Camera Link area or line scan video from
monochrome or RGB cameras. Your unit will include a special back-plate that
will accommodate the two Camera Link connectors.
The Matrox Meteor-II /Standard and /Multi-Channel frame grabbers can be made
especially for your Matrox 4Sight-M unit, in that their video input connector can
interface directly with a connector on your unit’s motherboard, which in turn, is
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30