Matrox Electronic Systems 4SIGHT-M - Manual (Page 28)

28 Chapter 2: Connecting peripherals to the unit
Connecting a USB mouse, keyboard, or
printer
You can connect any USB-compliant mouse, keyboard, or printer to the USB
connectors, located on the front panel of the Matrox 4Sight-M unit.
Connecting other USB devices
If you are using Matrox 4Sight-M under the Microsoft Windows 2000 or
Windows XP operating system, you can connect other USB devices to the USB
connectors.
If you are using another operating system, refer to its accompanying
documentation to determine if USB devices are supported.
Networking connections
Connect a network cable to an Ethernet jack, located on the front panel of the
chassis.
Required cabling for
Ethernet
connections Matrox 4Sight-M can gain access to a LAN via Fast Ethernet (100BaseT) or
Twisted Pair Ethernet (10BaseT) through the 10/100BaseT Ethernet jack. You
can also use a Gigabit Ethernet interface connection through the Gigabit Ethernet
jack.
If you plan to use Fast Ethernet, use an Unshielded Twisted Pair Category 5
(UTP5) cable. If you will be using Twisted Pair Ethernet, use a UTP5 or UTP3
cable. If you plan to use Gigabit Ethernet, use a Category 5e (CAT5e) cable.
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30