Matrox Electronic Systems 4SIGHT-M - Manual (Page 91)

Intel menu 91
• Mode.
This item allows you to select the data transfer mode through the parallel port
interface.
Options:
- Output only
- Bi-directional (default)
Intel menu
This section describes all the items of the Intel menu. Refer to the section entitled
The Legend bar for navigation guidelines.
Video (Intel IGD) Control submenu
In this submenu, you can configure items to control the internal graphics display
(IGD) device, that is, the graphics controller integrated in the Intel chipset.
• IGD - Memory size.
This item allows you to select the amount of memory to be used by the graphics
controller integrated in the Intel chipset.
Options:
- UMA = 1MB
- UMA = 8MB (default)
- UMA = 16MB
- UMA = 32MB
• IGD - POST Display type.
This item allows you to select the display device that will be used during POST.
Unless VBIOS Default is selected, POST assumes the selected device is connected.
Selecting VBIOS Default will cause POST to use the default display device
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30