Monarch Instrument 9460 - Manual (Page 18)

2-8 System Administrator’s Guide
Checking the Status
This option displays the status of the RF network.
1. From the RF Network menu, select Status.
192.0.0.192
1.0
(2006.11.20)
PXR1E858F
The local IP address, firmware version, printer model, board revision,
and device name are displayed.
2. Press A to see the next screen of information.
0040171E858F
Protocol: TCP
State: Wait
Radio: IEEE 802.11g
The MAC address, protocol, current state, and radio type are
displayed.
3. Press any A to return to the RF Network menu.
Configuring the Printer
The following menu shows the RF Network Configure options.
The Configure menu allows you to set the printer’s IP address, subnet mask,
gateway, power mode, protocol, SSID, and escape character.
To exit, press F at any time.
IP
Address Subnet
Mask Gateway Power
Mode
Configure
Protocol
SSID Escape Exit