Monarch Instrument 9460 - Manual (Page 25)

Configuring the 802.11b/g and IP Settings 2-15
Printing Info
Use 2.0” x 1.2” or 2.0” x 1.5” supply or
information may print off the label.
1. From the RF Network menu, select
Print Info. Three wireless network
information labels print.
The first label contains radio version
information. The second label contains
the RF (wireless) settings, including the
SSID, security, and signal strength.
The third label contains TCP/IP settings,
including the IP address, boot method,
etc.
2. Press any A to return to the RF
Network menu.
Resetting the RF Network
After you save the configuration, you must
reset the RF network before the changes
take effect. When you select “Reset,” the
printer turns off and back on.
Note: You may lose your current connection
and application. Resetting the network
may take up to one minute before you
can access the wireless print server
(radio).
1. From the RF Network menu, select Reset.
RESET
Reset command sent
Hit key to continue
2. Press any A to return to the RF Network menu.
The printer is ready to use.
Monarch Print Server Status
MAC: 00-a0-f8-5f-72-0b
Printer Model:
9460SNP
Boot Ver :
Version 1.0
Application:Peg3-1.0 (2006.05.02)
Label 1
Wireless Information
SSID: MON
123
Mode: INFRASTRUCTURE
Speed: 11
mbps
Security: WEP 128 bit
Sig. Strength:
100
Actual SSID: MON 123
Assoc. AP MAC: 00-a0-f8-aa-83-25
Label 2
TCP/IP
IP Address:
192.0.0.192
Subnet Mask: 255.255.0.0
Router: 192.0.192.0
(set manually)
Boot Method:
STATIC
Boot Retries: 4
Timeout: 0 min
Keepalive: 1 min
Label 3