Monarch Instrument 9460 - Manual (Page 20)

2-10 System Administrator’s Guide
Setting the Subnet Mask
This option sets the printer’s subnet mask.
1. From the Configure menu, select Subnet Mask.
Subnet Mask
255.255.000.000
E R +
Use A as shown in the following table:
E
Press A to
R
Press A to
+
Press
A to
Saves the setting Scrolls through the
positions from left to right Increments the current
position setting by 1
2. When the setting you want is displayed, press A under E to save the
setting. You return to the Configure menu.
Setting the Gateway
This option sets the printer’s router (gateway) address.
1. From the Configure menu, select Gateway.
Gateway
000.000.000.000
E R +
Use A as shown in the following table:
E
Press A to
R
Press A to
+
Press
A to
Saves the setting Scrolls through the
positions from left to right Increments the current
position setting by 1
2. When the setting you want is displayed, press A under E to save the
setting. You return to the Configure menu.