Monarch Instrument 9460 - Manual (Page 27)

Selecting a Management Method 3-1
S E L E C T I N G A M A N A G E M E N T
M E T H O D
There are a variety of ways to configure and monitor the network printer.
This chapter explains how to use NetManager, HP JetAdmin, HP Web
JetAdmin, UNIX, or Sun Solaris.
See Chapter 4, “Using a Web Browser” to configure the network printer via
your Browser.
See Chapter 5, “Using the Paxar Sierra Sport Configurator” to configure the
network printer via Avalanche software.
H P J e t A d m i n U t i l i t y
This HP Windows-based utility (works transparently with JetAdmin) can be
downloaded from the HP Web site (www.hp.com).
Note: The print server does not appear in the list of configured servers
unless TCP/IP or IPX is running on the computer.
H P W e b J e t A d m i n U t i l i t y
This HP utility for Windows NT Advanced Server and Windows 2000 can be
downloaded from the HP Web site (www.hp.com). Once it is installed, a web
browser on any computer that has access to the Windows NT/2000 server
may be used to access the print server.
M i c r o s o f t  W i n d o w s  N e t w o r k C o n f i g u r a t i o n
The print server includes the NetManager software for printing from Windows
computers over an 802.11b/g wireless link. This software creates a network
port on the Windows system, which acts like a normal parallel port. As a
result, it works transparently with any standard Windows printer driver and
application program. Since this software uses the industry-standard TCP/IP
protocol, it can be used with IP routers and other IP-based equipment.
3