Monarch Instrument 9460 - Manual (Page 19)

Configuring the 802.11b/g and IP Settings 2-9
Setting the IP Address
This option sets the printer’s IP address.
1. From the RF Network menu, select Configure.
2. From the Configure menu, select IP Address.
IP Address
192.0.0.192
E R +
For: Select:
BOOTP 0.0.0.0
DHCP 0.0.0.1
Static IP
nnn.nnn.nnn.nnn
Use the A buttons as shown in the following table:
E
Press A to
R
Press A to
+
Press
A to
Saves the setting Scrolls through the
positions from left to right Increments the current
position setting by 1
3. When the setting you want is displayed, press the A button under the E
icon to save the setting. You return to the Configure menu.