Monarch Instrument 9460 - Manual (Page 7)

Getting Started 1-1
G E T T I N G S T A R T E D
Use these instructions to configure your Monarch  Sierra Sport2
9460  SNP Printer. Your printer contains an 802.11b/g wireless print server
(radio), which operates on an 802.11b or 802.11g wireless network.
802.11b/g refers to 802.11b and 802.11g in this manual.
The printer (version 3.0 or greater firmware and version 1.4 or higher boot
loader) also includes support for the Wavelink
 Avalanche Management
Console software.
Note: Information in this document supercedes information in previous
versions. Check our Web site (www.paxar.com) for the latest
release and documentation information.
O v e r v i e w
You can use the print server in Ad-Hoc (peer-to-peer) or infrastructure
(access point) wireless mode. The print server operates at speeds of up to
11 Mbps on any IEEE 802.11b and 54 Mbps on any IEEE 802.11g wireless
compatible networks.
Follow the instructions in this manual to configure the wireless print server
for your printer. For more information and software downloads, see Chapter
7, “Troubleshooting.”
A u d i e n c e
This manual is written for the System Administrator who sets up printers on
the network and is familiar with basic networking principles.
1