Monarch Instrument 9460 - Manual (Page 30)

3-4 System Administrator’s Guide
Sun Solaris Configuration
To use a print server with Sun Solaris, first use the Host Manager in the
Admintool utility to add the print server IP address and name to the
/etc/hosts file.
1. Click None - Use /etc files on host.
2. Click Apply.
3. Click Edit and then Add Host.
4. Enter the print server name as the Host Name (this name is anything
you want, but should not have an "_" character in it).
5. Enter the IP address and Ethernet address of the print server (the
Ethernet address has the format aa:bb:cc:dd:ee:ff)
6. Select Add and then close the Host Manager windows
7. Use the Printer Manager in the Admintool utility under Open Windows
as follows:
Select Edit
Select Add
Select Add Access to Remote Printer
At the PrinterName prompt, type any name for the print queue
At the Printer Server prompt, type:
name\!servicename
(for example, PaxarPrinter\!BINARY_P1), where:
name matches the print server name as entered in the host’s table.
servicename is the print service name. For binary graphics files use
the service BINARY_P1; for text files use the service TEXT_P1.