Motorola III - Manual (Page 100)

MAEPF-22628-O
U, V, I 99
99 Trunked Radio Features Operation
(cont.)
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME
3 D E F 2 A B C 1
Call Alert Page Operation (cont.)
Direct Entry of the ID Number to be Call Alert
Paged
1. To directly enter the ID number to be Call Alert
paged, press the right arrow key ( ) until “PAGE”
appears on the display.
2. Press the key below “PAGE.” The display changes
to show the last ID number transmitted or
received. You can now enter the ID number to be
paged.
3. Enter the new six-digit ID number from the keypad.
On the display, the old ID number disappears and
the new digits appear as they are being entered.
The cursor flashes to indicate the location of the
next number to be entered.
Notes:
• If fewer than six digits are entered and the
PTT switch is pressed, you will hear a bad-
keypress tone. A bad-keypress tone will also
be heard if you try to enter a seventh digit.
• Once you have started entering numbers, the
l e f t a r r o w k e y ( ) w i l l f u n c t i o n a s a
backspace key. Pressing this key will cause the
last digit entered to be erased, and the cursor
to move to the left. When the last digit has
been erased, an additional press of this key
w i l l c a u s e t h e l a s t m e m b e r o f t h e
preprogrammed call list to be displayed;
pressing the right arrow key will show the first
member of the list.
1 3 D E F
6 MNO
8 TUV 9 W X Y
0
HOME
2 A B C
5 JKL 4 G H I
7 P R S
Note: If your radio has been so programmed, you
can press the page button for quick access to the
Call Alert feature. This will take you directly to the
“last ID number transmitted or received” display
shown in step 2; skip to step 3.