Motorola III - Manual (Page 57)

56 General Radio Features Operation
(cont.)
MAEPF-22627-A (H)
MAEPF-22627-O (D) 56
Trunked Telephone Operation (cont.)
• If the trunked phone interconnect is in use, a busy
tone sounds and “PHONE BUSY” is displayed. Your
number will automatically be dialed when the phone
interconnect becomes available. If you hang up, you
will lose your place in line.
4. If the access was successful, you will hear a dial
tone. The display will again show the last number
dialed.
5. The telephone number will be sent out; you will
hear tones as they are being sent. When the
number has been completely sent out, you will hear
either a busy signal or ringing. If you hear a busy
signal, go to step 7 for hang-up procedure.
6. If the party you are calling answers, carry on with
your conversation in the normal manner. Press the
PTT switch to talk; release the PTT to listen.
Notes:
• After reaching the number you are calling, you
may need to dial an extension number before
you can reach your party. If this is the case,
enter the extension number from the keypad
( M T S 2 0 0 0 I I I m o d e l o n l y ) o r ( i f s o
programmed) use the arrow keys to find the
extension number in the telephone list. If you
have live dial, the number will be sent as the
keys are pressed. If you have buffered dial,
press the PTT switch again to send out the
extension number.
• Motorola trunked radios generate a high-
pitched go-ahead tone when the radio's PTT
switch is released. This is heard by the land-
line party and is an indicator to begin talking.
7. When you have finished your conversation, or if the
number you are calling is busy or does not answer,
press the HOME key or the phone button to send
the hang-up code. The radio will return to the home
display.
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME