Motorola III - Manual (Page 94)

93
93 Trunked Radio Features Operation
(cont.)
MAEPF-22628-O
F, G, J, K, L, M
Trunked Private Conversation™ I and II Call
Operation
Calling an ID Number at a Location in the Call List
1. You can also call an ID number at a particular
location in the preprogrammed call list (for
example, the fifth location in the list would be
position “5”). To do this, press the right arrow key
( ) until “CALL” appears on the display.
Note: The same list is shared by both Private
Conversation and Call Alert features.
2. Press the key below “CALL.” The display changes
to show the last ID number transmitted or
received. You can now select an ID number from
the list.
3. Enter the list by pressing either the right ( ) or
the left ( ) arrow key. The right arrow key will take
you forwards to the first or next member of the
list; the left arrow key will take you backwards to
the last or previous member of the list.
Note: The last member of the list will also be the
“last ID transmitted or received” at position “OO” in
the list.
4. Enter the first digit of the location number.
a. If there are fewer than 10 members in the
list, the radio goes immediately to that position
in the list, and the display alternates between
showing that list member’s name and ID
number. Go directly to step 7.
b. If there are 10 or more members in the list,
the display changes to show “ID LOC#X_”
(where X is the first digit). The cursor will flash
to show the location of the second digit.
Continue with step 5.
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME
1 2 A B C 3 D E F
HOME
2 A B C 3 D E F 1
Note: If your radio has been so programmed, you
can press the call button for quick access to the
Private Conversation feature. This will take you
directly to the “last ID number transmitted or
received” display shown in step 2; skip to step 3.