Motorola III - Manual (Page 64)

63
63 General Radio Features Operation
(cont.)
MAEPF-22627-O
E, G, A-H, K
Trunked Telephone Operation (cont.)
Making an Immediate Access Call to a Number on
the Telephone List
1. To make an immediate access call to a number on
the preprogrammed telephone list, press the right
arrow key ( ) until “PHON” appears on the
display.
Note: If your radio has been so programmed, you
can press the phone button for quick access to the
telephone call feature. This will take you directly to
the “PLEASE WAIT” display shown in step 2; skip
to step 3.
2. Press the key below “PHON.” The display shows
“PLEASE WAIT” while your radio attempts to
access the telephone system.
Notes:
• This is a timed message. If you cannot access
the telephone system (no dial tone heard), you
will have to press the HOME key to hang up,
and start again at step 1 of this procedure.
• If you are out of range of the trunked system or
the phone interconnect is out of service, “NO
PHONE” is displayed and a continuous low-pitched
tone sounds.
• If the trunked phone interconnect is in use, a busy
tone sounds and “PHONE BUSY” is displayed.
Your number will automatically be dialed when the
phone interconnect becomes available. If you hang
up, you will lose your place in line.
3. If the access was successful, you will hear a dial
tone. The display will show the last number dialed.
4. To enter the telephone list, press either the right
( ) or the left ( ) arrow key. The right arrow key
will take you forwards to the first or next member
o f t h e l i s t ; t h e l e f t a r r o w k e y w i l l t a k e y o u
backwards to the last or previous member of the
list.
HOME
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0