Motorola III - Manual (Page 52)

MAEPF-22627-O
E, G, A-F, H, K 51
51 General Radio Features Operation
(cont.)
Conventional Telephone Operation (cont.)
Making an Immediate Access Call to a Number at
a Location in the Telephone List
1. To make an immediate access call to number at a
location in the preprogrammed telephone list,
press the right arrow key ( ) until “PHON”
appears on the display.
Note: If your radio has been so programmed, you
can press the phone button for quick access to the
telephone call feature. This will take you directly to
the “PLEASE WAIT” display shown in step 2; skip
to step 3.
2. Press the key below “PHON.” The display shows
“PLEASE WAIT” while your radio attempts to
access the telephone system.
Note: This is a timed message. If you cannot
access the telephone system (no dial tone heard),
you will have to press the HOME key or the phone
button to hang up, and start again at step 1 of this
procedure.
3. If the access was successful, you will hear a dial
tone. The display will show the last number dialed.
4. To enter the telephone list, press either the right
( ) or the left ( ) arrow key. The right arrow key
will take you forwards to the first or next member
o f t h e l i s t ; t h e l e f t a r r o w k e y w i l l t a k e y o u
backwards to the last or previous member of the
list.
HOME
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
1 2 A B C 3 D E F
HOME
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0